“Look Deep Into Nature and Understand Everything Else Better”

“Look Deep Into Nature and Understand Everything Else Better”
Albert Einstein

“Who Should You Believe” – When it comes to choosing the best PEMF device?

Let’s take this a step further, who do you believe when choosing the best food, supplements, water, etc?

Well, my answer is Look Deep into Nature and YOU WILL understand everything else better (to quote the great Albert Einstein)…

I want to help you simplify your approach to health and specifically on this website, I want to help you in choosing the best PEMF device for you and your family.

The human body needs elements from the earth: organic food (that’s nutrient rich and non-gmo), clean and energized water, natural full spectrum sunlight, oxygen from fresh air and YES pulsed magnetic fields (PEMF). PEMF is a required and necessary element found on planet earth and necessary for the human body to survive (as we will see on the next page).

Our journey together will be to comprehend and study the Earth’s natural pulsed electromagnetic (PEMF) energies and try to find a device that best matches what is found in nature.

Truth should be simple. Health should be simple and it is if you “Comprehend and Copy Nature”….

“Comprehend and Copy Nature”
Victor Schauberger

Victor Schauberger (know as “The Water Wizard”) was a great Austrian scientist, inventor and water researcher. He practiced and lived by the motto, “Comprehend and Copy Nature”.

He was often quoted as saying “Nature is My Teacher”.

I want to briefly mention Victor Schauberger because I truly believe his approach to understanding the best water Nature provides and his inventions of machines that duplicated nature’s process of making water can help us use a similar approach to understanding the best PEMF energies and which device(s) duplicate nature.

Schauberger and one of his predecessors, Vincent carefully studied the parameters of Nature’s best spring waters, parameters like temperature, pH, conductivity, surface tension, dissolved solids, etc, and carefully invented machines that replicated nature. Modern day tap water is loaded with harmful chemicals and in no way is similar to nature’s water.

He also observed how water moved, that it was sensitive to sunlight, had different cycles and he even believed water in nature had a living presence.

Before applying this reasoning to PEMF, let’s go through elements you are perhaps more familiar with (i.e. food, water and air) to illustrate to you how intuitive and logical this reasoning is.

The Four Elements of Health (Earth/Food – Water/H20 – Fire/Sunlight – Air/Oxygen)


Starting with food, there is a lot of confusion as to which foods to eat and which diet is best. Personally, I am a certified nutritionist and I am familiar with most of the popular diets.

What’s interesting to me is that even diets that seem diametrically opposite (like the Atkins diet and Vegetarian diets) share a lot in common (namely, what to avoid). There is no diet I am aware of that recommends fast food, white bread, soda pops, sugar, trans fats, processed foods, canned foods, processed salt, etc, etc.

My point is that whether you eat meat or not, these major diets DO stick with nature.  Personally I am a raw food vegan, but I am not sure this is the best diet for everyone. What I am sure of is that if you eat whole foods from nature (organic and non-gmo), fruits, vegetables, whole grains, nuts and grass fed meats and unprocessed dairy you can thrive. Again truth is simple: Stick with Nature.

When it comes to water, we should drink water that is purified with just the right amount of minerals. Like the best springs in nature OR a water processor that duplicates nature.

We also need clean air and plenty of oxygen. Indoor air was shown in one EPA study to be 30 times more polluted than downtown L.A. So try to get a good air purifier and get outside in the fresh country, mountain or ocean air as much as possible.

And perhaps not as critical, but still important is natural full spectrum light. We need an average of 30 minutes of full spectrum light a day otherwise we get what it known as Seasonal Affective Disorder (S.A.D).

There is much more to say about food, water, air and full spectrum light, but I want to keep it simple. We need these elements and the form we need is what is found in nature.

Fast foods, synthetic vitamins, drugs, tap water, soft drinks, forced air heat, air conditioned air and fluorescent lights are NOT natural and actually harmful to our health.

There is ONE MORE element that was not known to be essential, and that FIFTH Element is Pulsed Electromagnetic Fields (PEMF), which is the focus of this review site.

My premise is that we should seek a PEMF device that best duplicates nature, just like we should seek natural foods, water, air and full spectrum light.

PEMF – The Fifth Element (Part 1)

Most people know we need food (earth), water (water) and oxygen (air) to survive. And many people also know they need full spectrum sunlight (fire) or you get what is referred to as SAD (seasonal affective disorder). That makes FOUR critical elements, EARTH/FOOD, WATER, FIRE/SUNLIGHT and AIR/OXYGEN.

But most people DON’T know there is a fifth element also vital and necessary for human life. That element is…  PEMF!!!

PEMF – Pulsed Electromagnetic Fields, is the fifth element needed for human health and well-being. And just as all the elements come from the Aether/Ether, so does all matter arise out of pulsed electromagnetic energy PEMF. 

PEMF – The Fifth Element (Part 2)


In Yuri Gagarin’s historic flight into space, he returned in near critical condition after only one hour and forty-eight minutes in space. Clearly there was some vital element missing in space that we receive on earth. Well Yuri had plenty of food, he had water, and also oxygen and since the flight was less than 2 hours he really only needed oxygen. So what’s missing? Well you may say gravity and yes you would be correct, but we can survive in near weightless environments here on earth (in water for example) for just a couple hours. The critical missing element is PEMF – Pulsed Electromagnetic Fields.

Since that first flight, pulsed magnetic devices have been used in every space suit and space station with the notable inclusion in the MIR space station.

Further studies have been done on earth (zero field studies) with both laboratory animals and human subjects. What was found is that just in a matter of hours of NO exposure to healthy PEMF’s, cell metabolism begins to break down causing bone loss, muscle weakness, depressed metabolism, disorientation and depression.

Conclusion – Research has conclusively proven the fifth element PEMF is a necessary and required element of health just as is food, water, and oxygen and to some extent sunlight.

PEMF – The Fifth Element (Part 3)


PEMF’s are like a spark plug or catalyst for energy production in the cell. Just like a car needs oxygen, fuel and an ignition (spark plug), so does the human cell need fuel (glucose), oxygen and a “spark plug” or ignition. This ignition is PEMF or pulsed magnetic energy from both the earth and movement/exercise on the earth.

We can also think of PEMF as a battery recharger for the human cell. We now know that the voltage of a healthy cell is about 70-110 millivolts and when we get sick that voltage drops below 50 millivolts or less and cancer cells are 30 millivolts or less. Pulsed electromagnetic fields (PEMF) act like a catalyst and battery recharger for the human cells and these PEMF’s are critical for human metabolism.

PEMF’s also improve microcirculation, oxygenation (up to a 200% increase), help in nerve regeneration, pain management and many other health promoting benefits. There are over 2000 clinical studies and over 10,000 research papers validating the therapeutic benefits of PEMFs.

So What Is the Best type of PEMF for the Human Body?

To understand the best type of PEMF (now known as an essential element like food, water and oxygen) for the human body, there are four aspects of the pulsed magnetic fields you need to understand: frequency, intensity, waveform (or geometry) and timing (meaning our circadian rhythms and brain state frequencies change throughout the day).

My premise is that we evolved on planet earth and the earth provides us with EXACTLY what we need. Therefore we will closely look at the earth’s frequencies, intensities, etc. and try to duplicate nature as best as possible.

Doesn’t it make sense to stick close to Nature? Doesn’t it make sense to eat organic whole foods, drink pure water, and get natural sunlight and breath fresh air???

Doesn’t it make sense that when we eat processed foods, drink dirty tap water, live under fluorescent lights and breath stale, polluted air that we get sick???

So I want to appeal to your common sense and explain that when looking for a PEMF, pulsed magnetic therapy device, you should try to find a unit that is closely aligned to nature… I hope this makes perfect sense. It did to me when I first heard it.

The Intensity & Nature of the Earth’s Magnetic Field

A compass tells you what direction is ‘North’, but have you ever wondered how it can do that? The answer has to do with something called magnetism. Every magnet produces an invisible area of influence around itself. When things made of metal or other magnets come close to this region of space, they feel a pull or a push from the magnet. Scientists call these invisible influences FIELDS.

Using our premise that the Earth provides us with the perfect parameters for the health of our bodies, we shall explore the 4 aspects of the earth’s magnetic field and naturally occurring PEMF (pulsed electromagnetic) frequencies. So we will begin by discussing intensity.

The intensity is the STRENGTH of the earth’s magnetic field. Think of a strong electromagnet that can actually lift cars in a junkyard versus a smaller weak horseshoe magnet that barely picks up iron nails. Both create a magnetic field the difference is intensity.

Currently the earth’s intensity is between 30 and 60 microtesta (uT) or .3 – .6 gauss. Its stronger at the poles and weaker near the equator.

The Earth itself is like a big bar magnet (approximately a dipole), and the magnetic field looks similar to the picture above, though that picture is simplified (actually the more accepted theory is called the dynamo theory which says that the pulsating magnetic fields in the sun induce a current in the molten outer core of the earth (which has lots of free electrons) and that current in turn produces a magnetic field by ampere’s law (see below).

The magnetic poles are inclined about 11.3 degrees from the planet’s axis of rotation.

The Highly Energetic Nature of the Earth We Live on…

The Solar Wind is a relentless storm of energy emitted from the Sun that races outwards through space at rapidly and wildly fluctuating speeds of 200 – 700 km per second. These pulsating flows of energy create enormous pulsing electric and magnetic fields throughout space.

Additionally, there are approximately 100 lightning strikes every second on the earth, which equals a staggering 8.64 million, strikes a day!

This is the highly energetic environment within which we on planet Earth exist…

Magnetic fields extend indefinitely into space but become weaker as the distance increases from their source. The earth’s magnetic field, which extends thousands of miles into space, is called the magnetosphere.

The strength of the field at the Earth’s surface ranges from less than 30 microteslas (0.3 gauss) in an area including most of South America and South Africa to over 60 microteslas (0.6 gauss) around the magnetic poles.

The field is similar to that of a bar magnet but this similarity is not really correct. The magnetic field of a bar magnet, or any other type of permanent magnet, is created by the synchronized spins of electrons and nuclei within the atoms. The Earth’s core, however, is hotter than 1000 K, at which the orientations of spins within iron become chaotic. This causes the iron deposits to lose their magnetic field. Therefore the Earth’s magnetic field is caused not by magnetized iron deposits, but mostly by electric currents in the liquid outer core. This happens because the liquid outer core has a plethora of free electrons that form a current due to the pulsating magnetic fields of the sun (via Faradays Law). This is how power is created at the power plant. A changing magnetic field (generator) produces a electric current.

This electric current produced in the outer core than in turn creates a magnetic field by ampere’s law (see below).

This is the Dynamo Theory and it explains how the earth’s magnetic field is sustained.

Another feature that distinguishes the Earth magnetically from a bar magnet is its magnetosphere. At large distances from the planet, this dominates the surface magnetic field. Electric currents induced in the ionosphere also generate magnetic fields. 

Ampere’s Law

The IMPORTANT point of explaining this is that the earth’s magnetic field is produced by electrical currents, which by Ampere’s law produces a magnetic field.

This is a very important reason why pulsed magnetic therapy mats are more effective than static magnetic mattress pads. All the pulsed magnetic therapy mats on the market use electrical currents NOT static magnetics, just like the earth.

To better understand how currents create magnetic fields check out the link below. Don’t worry about all the equations, just notice the pictures. See how a current produces a magnetic field using the right hand rule and how magnetic iron filings align around the field. Also notice how a current loop produces a north-south dipole similar to a bar magnetic. This is how the pulsed magnetic therapy devices on the market work. The use one or several bundles of conducting loops that create a north-south dipole.


So What Magnetic Intensity is Best for Us?

If you have been following my line of reasoning so far, it is clear: use intensities within nature’s limits (30-60 uT). In fact, all the top and best researched companies making pulsed magnetic therapy mats independently discovered that weak magnetic fields on the same order of the earth’s intensities, work better than stronger fields.

So more is not better, in fact, less is more.

And to properly duplicate nature, static magnetics are not the choice because as we just explained the earth’s magnetic field is produced by moving electric currents in the outer liquid core. The magnetic field of the Earth is DYNAMIC, not static as many people mistakenly think.

So if we seek to duplicate Nature, the strength of the Magnetic field we should look for would be approximately 0-100 uT (or 0-1.00 Gauss). AND the magnetic field should be DYNAMIC not static. This means a pulsating magnetic field (PEMF).

Here’s one final point which hints that high intensities are not desirable and even could be dangerous (there are some very high powered PEMF devices on the market – this is very UNNATURAL and potentially dangerous):

The World Health Organization considers a continuous magnetic field of 100 micro-Tesla (1 Gauss) at 50Hz as safe.

Further the limit of strength for induced electromagnetic fields according to DIN (German industry norm) is 400 uT. There are no known risks with use of systems of low electromagnetic fields, but stay away from units going above 400 uT.

Again, it’s best to stick with Nature and even the government agencies recognize this.



Frequency Matters! The Key to Understanding PEMF (Most Important Chapter!).


Intensity is a little easier to understand as it’s just the strength, amplitude or dosage of something (or the amount). Frequency is a little more complex, but its crucial to understanding energy medicine and PEMF Therapy so we’ll carefully define it. I promise it will be well worth carefully absorbing this section and the next as it contains the most important thesis on this website, which is the FACT that frequency is the KEY to PEMF therapy, not intensity.

And as we’ll see, it’s specifically the frequency that the earth’s magnetic field and ionosphere (Schumann Resonance). These Earth frequencies are primarily in the 0-30 Hz range and they exactly match the frequencies of our body, mind, tissues and cells.

So give me your full attention for this page and the next and I promise you’ll glean a much greater appreciation for the importance of Earth based PEMF therapy. Let’s begin by defining frequency.

What is Frequency?

It’s easiest to think of frequency in terms of waves and it is measured in the hertz unit, named in honor of the 19th-century German physicist Heinrich Rudolf Hertz. The hertz measurement, abbreviated Hz, is the number of waves that pass by per second, or the cycles per second or number of oscillations per second. For example, an “A” note on a violin string vibrates at about 440 Hz (440 vibrations per second).

Frequency is an abstract mathematical concept that applies to many physical phenomenon. For example, water waves are a visual way to see frequency. If there are a lot of waves in a small given area that would be a high frequency relative to a small number of waves (see image to the left).

The Electromagnetic Spectrum


The most important application of frequency is in the electromagnetic spectrum, which includes visible light. The mysterious and vitally important photon is the force-carrying particle behind ALL electromagnetic interactions. Basically the photon carries or transmits the “force” responsible for all electrical interactions between charged particles, which are mainly the electron and proton in our everyday world.

But the photon does even more. It makes up all visible light, radio waves, infrared waves, x-rays and gamma rays and everything in between which in totality comprises entire electromagnetic spectrum as pictured to the left. The lowest frequencies in this spectrum are radio waves that can have a wavelength up to several hundreed miles. Then, in order of increasing frequency, there is microwaves, infrared, visible light, ultraviolet light, x-rays, gamma rays and cosmic rays. Notice we can only “see” a small tiny “slice” or portion of the electromagnetic spectrum which is visible light.

The Sun is a source of most of the electromagnetic rays we experience on a daily basis, which is mostly from the infrared through the visible to the ultraviolet end of the spectrum. Some animals can see into the infrared and ultraviolet, but the human eye can only detect around 400 – 700 nm wavelength which is around 10^14 cycles per second (a VERY HIGH frequency) corresponding to colors red through violet. Infrared is aptly named, as it is just “below” red, and ultraviolet is just “above” violet. Interestingly, the peak emissions from the sun are in this range such that the human eye seemed to evolve in synch with the emissions from the sun. Infrared and ultraviolet are not the peak emission but are definitely present as evidenced in the warmth we feel from the sun (infrared) and the sunburn we can experience from ultraviolet.

The earth itself emits frequencies which are all important for life to exist. These are the earth’s natural PEMFs that we need as an essential element for life and our health. Let’s take a closer look at the two components of frequency that the earth emits. The first is the resonant frequency of the Ionosphere called the Schumann Resonance and the second is the actual frequency of the earth’s magnetic field called the geomagnetic frequency. 

New Video! – Body Mind HEART Earth Connection (Contains NEW Information)

The Body – Mind – Earth Connection (0-30 Hz)
(2017 Update – I have recently Updated to 0-50 Hz – See video above)
​But main harmonics are still 0-30 Hz.


We hear a lot of talk about the Body – Mind connection and while it is important and based on science, it is missing ONE very essential component… THE EARTH!

If you can understand this section, you will understand exactly why we need pulsed magnetic intensities matching the earth with a frequency range of 0 – 30 Hz.

0 -30 Hz is the magic range and there is both scientific evidence and elegant beauty as to why your body needs this frequency range, especially the 7 – 8 Hz range (Schumann resonance).

The chart to the left summarizes the Body – Mind – Earth Connection.

First the earth emanates primarily this frequency range through both the Schumann resonance and its higher harmonics and also the frequency of the Earth’s magnetic field and its higher harmonics.

Next our brain and central nervous system are tuned to this frequency range as evidenced by the medically established EEG brain state frequencies from low delta to high Beta.

Next Sisken and Walker proved that the tissues in our body resonate primarily to this frequency range and Adey and Bawin showed that the actual biological window of our cells resonates to this range and NOT outside of it.

Finally and perhaps most incredible is the research of Dr. Zimmerman, co-pioneer of the SQUID technology developed for measuring very weak magnetic fields. He found that energy healers actually EMIT these frequencies and this was confirmed by Japanese researcher Seto on Chi Kung practitioners.

Thus we have the frequencies of life 0 -30 Hz. Let’s take a little closer look at this…

Schumann Resonance Frequencies – The “Heartbeat” of the Earth

It’s interesting that you can easily rearrange the word “Earth” and get “Heart”. The earth is a living organism, and if there were a heartbeat to the earth it would be the Schumann resonance frequencies.

Just as a tuning fork has resonant frequencies for sound, so the planet earth and the ionosphere surrounding it have resonance frequencies for electromagnetic radiation called the Schumann Resonances. Basically the ionosphere with the Earth’s surface creates a spherical wave-guide that surrounds the earth. Low frequency electromagnetic waves bounce around this waveguide, which is how radio signals can be transmitted around the globe. The fundamental frequency of this spherical cavity of the earth is 7.83 hertz, which, like a tuning fork, is the earth’s fundamental “note”.

These frequencies are excited mainly by lightning strikes (5000 lightning strike every minute) in the cavity formed by the Earth’s surface and the ionosphere, but can also be induced by solar flares.  More than 7 million lightning strikes the earth each day, which “ring” the proverbial bell of the ionosphere that chimes to the note of 7.83 and higher harmonics or octaves (as we’ll see). This natural frequency pulsation is not a fixed number, but an average of global readings, though the primary fundamental frequency is usually close to 7.83 Hz. The Schumann Resonance actually fluctuates due to geographical location, lightning, solar flares, atmospheric ionization and daily cycles. And contrary to the New Age discussions, the fundamental Schumann Resonance is not rising, at least according to continuous monitoring from geological observatories around the world.

And just as a piano has varying octaves of “C”, so too does Schumann frequencies have higher octaves or harmonics, the primary ones being in the 0-30 Hz range, which as we’ll see in the next section is the most important frequency range for or body, mind and cells . Note: the first harmonic of 7.83 is by far the strongest with each subsequent harmonic diminishing in intensity. For all practical purpose harmonics above the fifth are virtually non-detectable.

The Primary Harmonics of the Schumann Resonance
1st Harmonic 7.83 Hz
2nd Harmonic 14 Hz
3rd Harmonic 21 Hz
4th Harmonic 26 Hz
5th Harmonic 33 Hz
6th Harmonic 39 Hz

It is important to note that the Schumann Waves are quasi-standing waves or scalar waves and as such are more fundamental then electromagnetic waves. One simple way to understand this is that the 7.83 Schumann scalar wave is the prime “channel” or broadcasting frequency for all of life on earth. It appears all animals and living organism are tuned to this frequency and its harmonics and it is the most important facet of the Earth PEMF (along with the earth’s magnetic field and its frequencies) that we need for life. We all march to the cadence of this cosmic drummer — our planetary heartbeat, which sets the tempo for our health and well-being.

Below is a CURRENT chart of the Schumann… Note the Schumann Resonance Is NOT rising contrary to what some new age teachers say.



The Frequencies of the Earth’s Magnetic Field (11.75 and 11.79 Hz).

If you look at a compass under high magnification, you will see that it vibrates and fluctuates. The earth’s magnetic field is not a constant magnetic field like a bar magnet, but varies with time and it has a measureable frequency just like the Schumann resonance from the Ionosphere.

Compelling evidence of the earth’s geomagnetic frequencies is found in Klaus Piontzik’s book, “The Lattice Structure of the Earth’s Magnetic Fields” whereby Piontzik lays out a derivation of the fundamental frequency of the earth’s magnetic grid.

Using Fourier analysis and geomagnetic data from 200 measuring stations around the world, Klaus has discovered that the earth’s magnetic field has an oscillating structure with source points coming from four poles (not just two). That is, the earth is a quasi-quadruple. His model shows that several of the popular energy grids (the basis for lay-lines in dowsing) such as the Hartman grid, Curry grid, and others are actually harmonics within the earth’s actual geomagnetic field and its frequencies (see image to the left). The earth’s magnetic field is MORE than just a static or DC (direct current) field; it has a frequency harmonic as well.

This frequency was found by Piontzik to be 11.79 Hz at the poles and 11.75 Hz at the equator. The difference coming from the fact that the Earth “bulges” at the equator due to centrifugal forces of its rotation.

So the earths magnetic field itself has a fundamental frequency and that frequency is 11.79 Hz (polar) and 11.75 (equatorial). And like the Schumann frequency, it too has higher harmonics which at the Pole Radius are 11.79 Hz, 16.67 Hz, 23.58 Hz. and 30.80 Hz.

Nikola Tesla also measured the frequency of the earth to be around 12 Hz and based some of his free energy devices on this frequency.

It is important to note that the primary frequencies and harmonics for both the Schuman and geomagnetic frequencies lie within 0-30 Hz. As we’ll see, this 0-30 Hz is the primary window of frequencies that the earth emits and also that the human body, mind and cells resonate to which is one of the main points on this website.

Brain State Frequencies (0-30 Hz)



Evidence that our cells and Tissues need 0-30Hz PEMF


At the level of tissues, the same 0-30 Hz frequency range has been shown to have the most positive benefits on the human body. The Table to the left lists frequencies in the 0-30 Hz that biomedical researchers are finding that are effective for jump starting healing in a variety of soft and hard tissues.

In 1995, Siskin & Walker noted that an ELF of 2Hz stimulated nerve regeneration, and a frequency of 7Hz can be used to stimulate bone growth. Frequencies of 10Hz promotes ligament healing, and 15, 20, and 72Hz may be used to decrease skin necrosis and stimulate capillary formation. Since tissues and organs are made of cells this research further confirms the hypothesis that the human body needs, resonates and responds to the 0-30 Hz range of frequencies.

Frequencies Emitted from Energy Healers and Chi Kung Masters (0 – 30 Hz)


In the early 1980’s, Dr. John Zimmerman began a series of important studies on therapeutic touch, using a SQUID magnetometer at the University of Colorado School of Medicine in Denver. Zimmerman discovered that a huge pulsating biomagnetic field emanated from the hands of a TT practitioner.

The frequency of the pulsations is not steady, but “sweeps” up and down, from 0.3 to 30 Hz (cycles per second), with most of the activity in the range of 7-8 Hz.

The biomagnetic pulsations from the hands are in the same frequency range as brain waves and scientific studies of the frequencies necessary for healing indicate that they naturally sweep back and forth through the full range of therapeutic frequencies, thus being able to stimulate healing in any part of the body.

Confirmation of Zimmerman’s findings came in 1992, when Seto and colleagues, in Japan, studied practitioners of various martial arts and other healing methods. The “Qi emission” from the hands is so strong that they can be detected with a simple magnetometer consisting of two coils, of 80,000 turns of wire. Again it was found that the Qi Kung Practitioners emitted the same frequency range of 0-30 Hz.

Further Evidence and Research in the 0-30 Hz Range
Notice Many conditions ABOVE 30 Hz are also listed below 30 Hz (ie Osteogenesis, DNA Synthesis)
Still all of these are considered Extremely Low Frequency (ELFs) 



Lower Frequencies of the Earth – Completing the 0-30 Hz range


We saw that the primary harmonic frequencies of the Schumann resonances and the geomagnetic frequencies were between 7-30 Hz. So what about the lower frequencies from 0-7 Hz, which as we’ll see are a vital spectrum of frequencies as well, such as in the delta and theta brain wave frequencies?

Here are some natural frequencies of different radii on the earth, month and sun that seem to correspond to the Delta and Theta waves of the Human Brain that perhaps may explain why we operate at these lower frequency also.

Plasma Sheet (opposite Sun), inner radius = 60,000 km 0.8 Hz
Magnetopause (toward Sun), radius = 60,000 km 0.8 Hz
Geosynchronous orbit, radius = 35,000 km 1.4 Hz
Outer Van Allen electron belt, outer radius = 25,000 km 2 Hz
Inner Van Allen proton belt, outer radius = 12,000 km 4 Hz
Inner Van Allen proton belt, inner radius = 8,400 km 5.7 Hz

As to the following frequencies:
Magnetopause (opposite Sun), radius = 380,000 km 0.125 Hz
Plasma Sheet (opposite Sun), outer radius = 380,000 km 0.125 Hz
Moon orbit, radius = 384,000 km 0.125 Hz

This is important, because next we are going to discuss perhaps the MOST important insight on this site, namely the BODY – MIND – EARTH Connection and why 0-30 Hz is the most important healing frequencies the body needs (and the earth gives us!).

Source: http://www.valdostamuseum.org/hamsmith/Schumann.html

Global Coherence Initiative (HeartMath)
Geomagnetic Frequencies from 0-2 Hz


New Evidence from the Global Coherence Initiative shows that the earths Geomagnetic Field has very low frequency components from 0-2 Hz.

There is a lot to say about this new and exciting research…
So More Coming Soon!

Conclusion: 0 – 30 Hz, The Frequencies of Life!


O.K., now for the exciting conclusion: Can you guess which frequencies are ideal for the human body and optimal health? If you answer 0 -30 Hz, give yourself a pat on the back.

I hope this makes sense, because it is such an amazing blend of scientific fact and intuitive understanding coupled with sheer and elegant beauty.

This is the Body – Mind – Earth connection and the BEST pulsed magnetic therapy device should use primarily 0 -30 Hz… As we shall see in the reviews, there is really only one such device, though there are a few others that are close.

Just remember that the Earth primarily emits this frequency range, our brains run and operate both day and night in this frequency range and our cells and tissues resonate to these frequencies and most amazingly, we actually emit from our hands these very frequencies.

It amazes me that more magnetic pulser devices do not use this frequency range???

To me the obvious choice is a device that concentrates on these frequencies using the intensities of the earth as well.



“Flat” COILPRO PEMF Coils (Air Core) – Over 100 Gauss magnetic flux density output.

Flat design makes it great for laying down on it, to use for your back, shoulders, etc.

High Gauss output (100+ Gauss) for deeper penetration.

Work with all Wavemaster Controllers with RCA plugs. (note: We can customize the connector end to your specification if you have your own Controller. A small fee may apply if you use an expensive connector style. We will let you know the cost before proceeding. Contact sales@2ground.com for more info).

Covered with soft fabric, the bare enameled copper pictures are so you can see what is underneath.

Available in 3 inch, 4 inch and 6 inch diameters. Larger diameters, such as 8 inch, 12 inch, or even larger now available on request.

Wound with enameled magnet wire and fully cured with protective coatings, then wrapped with comfortable, durable fabric.

RCA Plug connectors provide easy connect and disconnect from Controller for cleaning or storage.

The 3″ and 4″ COILPRO coils can be used for the fingers to the upper arm as well as the back. The 6″ COILPRO coil is for the toes to above the knees, although the 6″ COILPRO coil will work for the entire arm as well. We have tried to accommodate the most common sizes to suit most people, however, we’d be happy to wind coils to suit your specific needs.

You can either place the affected area inside the COILPRO coil, or place an open side of the COILPRO coil on to or near the affected area.

For example, to use for the shoulders, back and other hard to reach areas, simply place the open side of any size COILPRO coil on the affected area. For arms and legs, place the affected area inside the COILPRO coil.

Technical Specifications:

All COILPRO PEMF Coils have a resistance of approximately 3 to 6 Ohms, depending on the size and wire gauge used.

The COILPRO Coil cores are made of enameled magnet wire then the windings are coated with special insulating materials that won’t crack, chip or become brittle.

The special coatings also resist weathering, chemicals, impact, and abrasion while allowing the natural beauty of the copper to shine through.

The cable from the COILPRO Coil to the Controller is approximately 5 feet long and is terminated with a Male RCA Plug. It is securely fastened to the Coil with a cable gland and epoxy resin.

Approximate Dimensions

3″ Coil = > 3″ Inner Diameter
4″ Coil = > 4″ Inner Diameter
6″ Coil = > 6″ Inner Diameter
Approximate Product Weight

3″ Coil = 280 grams (9.9 ounces), wound with 23 AWG magnet wire
4″ Coil = 350 grams (12.3 ounces), wound with 22 AWG magnet wire
6″ Coil = 502 grams (17.7 ounces), wound with 20 AWG magnet wire

More details to follow shortly, meanwhile, here is a video on how to use 2Ground PEMF Therapy Equipment:

PEMF – The 5th Element (the PDF version of the book)

PEMF – The 5th Element (the PDF version of the book)

Excellent read, highly recommended for those of your interested in a natural healing protocol.

More than 10,000 Scientific Papers and 2000 Double Blind Studies have been published about the effect of PEMF.

Learn Why Pulsed Electromagnetic Field (PEMF) Therapy Supercharges Your Health Like Nothing Else!

View/Download here:


Exterior Smart Meter Shielding Kit Instructions

Locate the Smart Meter on the outside wall of your home and install the kit as described below:

1) Locate your smart meter, Figure 1

2) Clean and dry the exterior of the glass, especially on the bottom. Use only a damp cloth.
3) Hold the larger Velcro® strip on the bottom of the smart meter glass and trim any excess which protrudes from the front of the smart meter. Peel
the adhesive backing and position this Velcro® strip on the bottom of the glass as shown in Figure 2.

4) Position and adhere the smaller Velcro® strip on the top of the glass as shown in Figure 3.

5) Press one short edge of the shielding mesh into the bottom hook material. Only cover ½ of the hook material, see Figure 4.

6) Wrap the shielding mesh snugly around the meter glass. Make sure the fabric extends all the way to the metal housing. Do not leave an uncovered gap where the meter glass meets its metal housing. Figure 5.

7) When you are satisfied with the position of the shielding mesh, press it firmly into the top and bottom Velcro® strip.
8) Trim excess shielding mesh to the desired length, see Figure 6. Leave a little extra mesh so it is easy to connect the ground cord. The excess mesh covering the face of the smart meter can be left in place or trimmed away.

9) Connect one end of the ground cord to the shield and the other to a convenient place on the metal meter housing, see Figure 7.

10) Wrap the EMF/RF Shielding Tape around the mesh for added protection (see Figure 8).

That’s all there is to it. Of course, you can add a separate shield on the wall behind the smart meter if you wish to protect the indoor space as well.
See Smart Meter Shield – Interior Kit for details

Frequently Asked Questions

Once Shield is installed, can our utility company still read our meter?
Yes, the design of this shield allows the utility company to receive your energy usage readings remotely and by direct visual inspection.

Is it illegal to put the shield on a Smart Meter?
No, it is not illegal to put this shield on your smart meter. It is illegal to break the glass or security seal on your smart meter. Please do not
break them.

Will the utility company take it off?
No, usually not. Utility companies don’t usually care what you do to the smart meters as long as you:
– Don’t break the glass or security seal… – Don’t prevent them from receiving their signal… – Don’t block the access to their meter.

Can I measure the shielding performance?
Yes, definitely. You will need a suitable RF meter such as the Acoustimeter or High Frequency Meter see http://www.2ground.com/EMF_and_RF_Test_Equipment/cat3801719_3190884.aspx).
Set the meter in a fixed position and monitor the radiation output from your smart meter. Without moving your RF meter, install the shield
and see the difference in your meter readings. Note! The RF meter should be positioned to the side of the smart meter and should be far
enough away that the RF meter does not exceed its maximum range.

Now, the radiation will be reflected back to the outside of your home instead of hitting you and your Family members.
(Instructions with images and video showing the effective RF blocking properties and RF meter readings will be added to the website soon).

Clinical toxicities of nanocarrier systems

Clinical toxicities of nanocarrier system1

Download the word document via the link above, it has comments added.

Clinical toxicities of nanocarrier systems

Show more


Get rights and content


Toxicity of nanocarrier systems involves physiological, physicochemical, and molecular considerations. Nanoparticle exposures through the skin, the respiratory tract, the gastrointestinal tract and the lymphatics have been described. Nanocarrier systems may induce cytotoxicity and/or genotoxicity, whereas their antigenicity is still not well understood. Nanocarrier may alter the physicochemical properties of xenobiotics resulting in pharmaceutical changes in stability, solubility, and pharmacokinetic disposition. In particular, nanocarriers may reduce toxicity of hydrophobic cancer drugs that are solubilized. Nano regulation is still undergoing major changes to encompass environmental, health, and safety issues. The rapid commercialization of nanotechnology requires thoughtful environmental, health and safety research, meaningful, and an open discussion of broader societal impacts, and urgent toxicological oversight action.

  • Nanocarrier;
  • Polymeric micelles;
  • Dendrimer;
  • Nanosphere;




grains: beans, barley, grain crops, oats, rice, rye, sorghum, wheat, buckwheat, flax, corn, peas, seeds, soybeans Grain/cereal/flour bins

(empty/full), grain/ cereal flour storage areas (empty/full), food/

feed storage areas (empty/full), silo, household/ domestic dwelling indoor food handling areas, commercial transportation facilities,

food processing plant premise/equipment, eating establishments

food handling areas (food contact), eating establishment food

sewing areas (food contact), and food/grocery marketing/storage/

distribution facility premise


Indoor Non-Food

(including Commercial/Residential

Sites) : Kennels, pet sleeping quarters/veterinary,

cats (adult/kitten)*, dogs/canine (adult/puppies),

pet living/sleeping quarters, pet bedding, domestic

dwelling, household/domestic dwelling indoor premise, household/domestic dwelling content, human bedding/mattresses, refuse/solid waste containers (garbage cans)



Aquatic on-Food Site (Commercial)Sewage Systems Outdoor Sites

(including Commercial/Residential): Kennels/pet sleeping

quarters/veterinary, household/domestic dwelling (outdoor),

wood protection treatment to building/products (outdoor),

commercial/institutional/industrial areas (outdoor)

Indoor Food (including Cornmercial/Agricultural/ Residential) Grain crops, grain/cereal/flour bins (empty/ full), grain/cereal/flour elevators (empty/full), food/feed storage areas (empty/full), grain/ cereal/flour storage areas, dairy cattle, poultry, beef/range/feeder (cattle), hog/pig/swine, house- hold/domestic dwelling food indoor establishment, food processing plants premise/equipment, feed mills/feed processing

plants, flour mills, cereal plants, eating establishments food handling areas (contact), eating establishments food serving areas

(contact), food/grocery marketing/storage distribution

facility premise 000565 Indoor Non-Food (including Commercial/Agricultural/ Residential) Kennels/pet sleeping

quarters/veterinary, horses, animals (lab/research) ,

commercial transportation facility, eating establishments

non-food areas, commercial/institutional/industrial

premise/equipment (indoor), cats (adults/kittens), dogs/canines

(adult/puppies), monkeys, ferrets, birds, pet living/ sleeping quarters,

pet bedding, domestic dwellings, household/domestic dwellings (indoor), household/ domestic dwelling content, wood protection treatment

to building (indoor), human bedding/mattresses Indoor Medical:

Hospitals/medical institutions (human/veterinary


Exemption of Tolerances

silicon dioxide and silica gel (hydrated silica) have received

exemptions from tolerances and clearances for certain use patterns

associated with food commodities. These exemptions and clearances

are: -when applied as an inert ingredient, or occasionally as an active,

to growing crops and raw agricultural commodities (40 CFR 180.1001(c)

and (a)); -when applied as an inert, or occasionally as an active

to livestock (40 CFR 180.1001(e)); -when applied as an active ingredient

to growing crops, raw agricultural commodities after harvest and to livestock (40 CFR 180.1017). Current exemptions from tolerances in 40

CFR 180.1017, 185.1700 and 186.1700 are limited to the naturally

mined silicon dioxide-containing product diatomaceous earth.


Anhydrous silicon dioxide has a molecular weight of

60.09. Silica gel and other amorphous forms of silicon dioxide will have

a varying molecular weight, depending upon the extent of hydration. Diatomaceous earth consists of siliceous frustules and fragments

of various species of diatoms mined from the beds of former inland

lakes. It is composed of approximately 85% silica, other oxides

and organic materials. The natural grades are mined and then

dried, ground, sifted and bagged. Both forms used as pesticidal

active ingredients are generally white powders at room temperature which melt to a glassy consistency at high temperatures. Silicon

dioxide is practically insoluble in water, but is soluble in hydrofluoric acid. Heating with concentrated phosphoric acid may

slowly dissolve as well. Amorphous forms of silica may be dissolved by hot concentrated alkaline solutions, but crystalline forms generally are not soluble. Silica is not soluble in any organic solvent. The bulk density is in the range of 10-20 lb/ft 3 and the true density is approximately 2.2 g/cm 3. The pH of an aqueous suspension of silica gel can range from 2.3-7. All product chemistry requirements have been satisfied


Oral Administration

Rat: A group of 30 weanling Sprague-Dawley rats was administered 20

mg/day of diatomaceous earth in cottage cheese at a concentration of

5 mg/g cheese, in addition to a basal diet & libit were observed for

their life span (mean survival 840 days). Five malignant tumors (1

salivary gland carcinoma, 1 skin carcinoma, 2 sarcomas of the

uterus, 1 peritoneal mesothelioma) and 13 benign tumors (9 mammary fibro adenomas, 1 adrenal pheochromocytoma, 3 pancreatic adenomas) were

observed in treated animals. A control group of 27 rats with mean survival of 690 days had 3 carcinomas (1 each in lung, ovary and fore stomach) and 5 mammary fibro adenomas. k/



Mouse: Groups of 75 mice were exposed to various particulates including

0.5 g/day precipitated silica (particle size was reported to about 5

um or less in diameter) once an hour for 6 hours on 5 days/week for

1 year and observed for their lifespan. Survival at 600 days was 12/74

in the silica treated group and 17/75 in one control group and 13/73

in the second control group. The incidence of pulmonary adenomas

and adenocarcinomas in mice surviving 200 days or more was 5/63

and 5/52 in the control groups at 13/61 in the silica treated group.

I/ Rabbit: Inhalation of 40 mg/ml amorphous silica for up to to

1100 days was reported to produce Ildiffuse tissue reactions. a/



Dietary exposure

Dietary exposure to silicon dioxide and silica gel The

may occur from their application to certain crops and

in and around food handling and preparation areas. amount

of ingestion has not been quantified for this assessment because

they are exempt from tolerance requirements at all levels in food.

to be inconsequential because of the ubiquity of forms of silicon

dioxide in the environment




Nano-silicon dioxide toxicological characterization on two human kidney cell lines

V Paget, J A Sergent and S Chevillard1

Published under licence by IOP Publishing Ltd
Journal of Physics: Conference Series, Volume 304, Number 1


Silicon dioxide nanoparticles (n-SiO2) have recently encountered a wide variety of applications in medicine or engineering but their toxicological effects are poorly understood. In this study, we have used SiO2-25 nm and SiO2-100 nm mono-dispersed nanoparticles labeled with Rhodamine B and TMPyP respectively. These two fluorophores were incorporated during synthesis in order to track nanoparticles cell incorporation. Up-to-date, no evaluation of the toxicological effects of these nanoparticles upon human kidney has been published. As kidney is one of the major traditional retention organs, the aim of our study is to evaluate the potential toxicity of these nanoparticles on two human cell lines from proximal tubule (Caki-1 and Hek293). Our results report that the two cell lines do not show similar responses after 24 hours of exposure to SiO2-nanoparticles disregarding a similar origin in the kidney. Interestingly, our results indicate that for both tested SiO2-nanoparticles, Caki-1 cells present a higher sensitivity in terms of cytotoxicity and genotoxicity than Hek293 cells. Furthermore, our results show that for similar concentration of exposure, SiO2-25 nm seems to be more cytotoxic and genotoxic than SiO2-100nm for both tested cell lines.



Dangers of SiO2 nanoparticles


the dangers of SiO2 nanoparticles has been studied pretty well.  I didn’t realize how dangerous this compound is, and that the FDA allows it sprayed on unfinished food and not labeled.  In most people, it doesn’t cause “acute” reactions, but it causes a.  After the obdy gets rid of the SiO2, and it’s introduced into the continuous crystallization inside the body liquid crystalline matrix inside the body, it starts crystallizing to itself, forming larger crystals.  If you don’t believe me, go take a vitamin pill containing amorphous SiO2, wait about 2 hours, then look at your blood under a darkfield microscope.  You’ll see the crystals formingSome are as small as a little dot that will reflect the light), but others are as big as a red blood cell, and are obvious crystals.  When I did some darkfield work, I saw the crystals as well.  I asked what they were (not realizing anything in this email, below), and the guys said “artifacts.”  He also noted that he has been seeing a LOT more artifacts in people’s blood, and don’t really know what they were, or where they are coming from.  Here’s one extract from a book:


When it’s sprayed on food, it acts as a drug delivery system, just like it says aboveIt’s properties allow it to coat proteins, gluten, amino acids, etc… to artificially transport them into the bodyEssentially it acts to force injections into us.  So when you said awhile ago that you speculated there might be forced vaccinations….it already is happening…through the food.  There’s already evidence that TiO2 nano-particles cause iron uptake dysregulation in chicken intestinal cells, and amorphous SiO2 acts the same waySiO2 forces a breakdown in the gut regulation cells, and it does it through ‘disconnecting’ the cells from host. : SiO2 and TiO2 nanoparticles have what is known as ‘light scattering’ properties and electrical insulating properties.  When the SiO2 is ingested, it coats the outsides of the cell walls [the phosphatidylcholine, carbohydrate chains, and proteins (etc)].  When the insulating effect is began, the cell loses connection to what it’s supposed to be doingThis energy originates in the heart, and with every beat we have the heart putting out light energy and epigenetically changing DNA expression (almost instantaneously).  So you can see what happens when you insulate a certain set of cells from receiving that energy with TiO2 or SiO2 nanoparticles; they malfunction.  Also, SiO2 and TiO2, as I alread said, have ‘light scattering’ properties.  This is just another term for a re-direction or, changing the amplitude and wavelength of the energy being passed through it.  It does it very well.  So when our heart and nervous system emit informational instructions, these instructions are either not fully received (as I said before), or they are changed, so the cell gets bad information, and malfunctions.–I learned all this by studying the work and research of Dr. David Jeringan, Dr. Jerry Tennant, Dr. Hal Huggins,  (and from the researchers that they got their info from), and by reading about how you can extract the DNA of living cells, in tissue, and they do not malfunction (but obviously cannot reproduce).  They continue to operate normally until they are removed from their host, which says….the host is controlling the DNA expressions and forcing the cells to function correctly, so something else other than DNA is doing it.  Dr. Jernigan talks about how the light of the body controls DNA expression…so there it was, staring me in the face:  Disrupting energy flow by adding “inert” SiO2 and TiO2 nanoparticles to essentially all the food are the root issues with out food.  Not only that, nano-silicates have a immune-stimulating response when introduced to the immune system (just like the pico-sized aluminum particles in the vaccines), for the reasons I said above (the immune system recognizes a malfunctioning cell, figures out the cell wall is resonating “silicon signatures,” and destroys itThis is called cell mediated immunity to haptens (nanoparticles are the hapten” which induces autoimmunity, TNF-alpha, and interleukin, and cytokine increases).

From the University of Colorado Dept. of Microbiology, Immunology, and Pathologyanything implanted in bone will create an autoimmune response.  The only difference is the  time it takes.”  —-guess what happened to this professor after he proved and released this information?  From the inside info I got, this news release (not the actual link) was unauthorized, and the Professor was “let go.”  He went to Pepperdine after this, and continued research in this category.  I believe he started a business, or joined a business that is researching how to implant the patients own DNA into ceramic and composite compounds for future use inside the body.  Why??  LOL…we already “know” the body is going to form an autoimmunity to metallic implants into any bone structure!  It’s just a matter of time until we find out our nano-silicon implants are really causing some issues.  If the body is “taught” that silica is an antigen, it will get rid of anything that is silicon-based or reject anything that is silicon-coated.  Hence, we get allergic to anything sprayed with nano-silica, or “learn” to get immune response to vitamins when mixed or coated with nano-silica (>90% of supplements).  –Now you see why Codex required capsule fill requirements, and silica was one of the approved fillers.  Also, essentially all the pharmaceutical companies are using one of three immune system modifiers: nano- silicon, alumina, or titaniumMCC and polymers are carcinogenic, just as you said previously.  I looked up the GRAS report on those, and actually read it.  It seems the studies were “stopped” when an increase of organ weights were noticed, and then deemed “GRAS.”  What a crock of dog shit!

Results from realizing this:  I got off everything containing this junk, and perfect health returned.  Feel free to reiterate any of this to anyone you feel it’s important to, or to post wherever you want.  I don’t want any credit, just that these jokers get exposed for inducing rampant [and random] diseases in the population, and convincing younger people that their “genetics are broken,” and “you need to take one of those genetic tests” and take supplements (containing junk that will break your genetics more) to target the”genetic mutations” they have.  Or for the older populations, that “they need to take [______] drug, because they have [______] disease.”    The truth is, the body can NEVER fix the mutatuions with nanoparticles inside of it, blocking the cells from sensing what they need to do.  Well, I guess it’s pretty ingenious plan if I wanted to steal the wealth from the babyboomers, and steal the future health of the younger generation away from them, get everyone on supplements of some sort (inducing money into the system), bring the entire population to their knees, turning them upside down and circle-jerking the money out of their pockets.



Nanocarriers discovered thus far include polymer conjugates, polymeric nanoparticles, lipid-based carriers, dendrimers, carbon nanotubes, and gold nanoparticles. Lipid-based carriers include both liposomes and micelles. Examples of gold nanoparticles are gold nanoshells and nanocages.[2] Different types of nanomaterial being used in nanocarriers allows for hydrophobic and hydrophilic drugs to be delivered throughout the body.[4] Since the human body contains mostly water, the ability to deliver hydrophobic drugs effectively in humans is a major therapeutic benefit of nanocarriers.[5] Micelles are able to contain either hydrophilic or hydrophobic drugs depending on the orientation of the phospholipid molecules.[6][7] Some nanocarriers contain nanotube arrays allowing them to contain both hydrophobic and hydrophilic drugs.[8]

One potential problem with nanocarriers is unwanted toxicity from the type of nanomaterial being used. Inorganic nanomaterial can also be toxic to the human body if it accumulates in certain cell organelles.[9] New research is being conducted to invent more effective, safer nanocarriers. Protein based nanocarriers show promise for use therapeutically since they occur naturally, and generally demonstrate less cytotoxicity than synthetic molecules.[10]